Description
Biocide indicated for the treatment of the aqueous phase of fuel storage tanks.
To treat feet of water, when the fuel itself is not contaminated. Can also be used to treat heavily contaminated fuels, when the treatment of the fuel itself is not sufficient.
- Broad spectrum of activity, including against bacteria sulfato-reducing agents.
- Non-corrosive, does not attack surfaces.
PROPERTIES
As a biocide of the aqueous phase, ORGANCIDE OX has the following characteristics:
- Weakly acidic (pH at 1%:4.7)
- Non-corrosive
- Does not attack surfaces
- Acceptable effect on the environment during purges
- Able to be neutralized with sodium bisulfite
- Can be used in cases of heavy contamination: as fuel treatment is not sufficient, the tanks are emptied, cleaned and disinfected with a 20% aqueous solution of OX ORGANCIDE.
DOSAGE
The concentration of biocide in the aqueous phase must be 500 ppm, i.e. 0.5 litres of ORGANCIDE OX per 1 m³ of water, in order to leave a certain safety margin. Unfortunately, it is very difficult to measure the quantity of water settled in the bottom of the tank.
If it is assumed that the ratio of settled water to fuel is generally close to 1:1000, the concentration of ORGANCIDE OX relative to the fuel should be
- Preventive treatment
0.5 ppm (1 litre per 2 000 m³ of fuel)
- Curative treatment
5 ppm (1 litre for 200 m³ of fuel)
Notice
There's no notice yet.